Instructions for using electrocardiogram leads:
1. Connect the instrument plug of the electrocardiogram lead wire to the electrocardiogram monitoring instrument, and ensure that the markings on each lead wire and the main cable are consistent;
2. Clean, disinfect, and dry the epidermis of the signal acquisition site;
3. Place the electrocardiogram electrode at the signal acquisition site;
4. Connect the lead wire to the electrocardiogram electrode. If the product is a buckle type lead wire, first buckle the electrocardiogram electrode and lead wire, and then place the electrode at the signal acquisition site;
5. After the connection is completed, the detection operation can begin;
6. Clean and dry with clean water for later use.
Product transportation:
The product should be protected from heavy pressure, rain, and high temperature during transportation.
Product maintenance and upkeep methods:
When necessary, disinfect the product with alcohol and remove any residue with a cloth soaked in water. Ventilation should be done in a cool and dry place to avoid compression. Alcohol should not be used for neonatal leads and dynamic electrocardiogram leads.
Storage method:
Store in an environment with a temperature of -10 ℃ to+40 ℃, a relative humidity of ≤ 80%, no corrosive gases, and good ventilation.